Forklift Training Programs Toronto

Forklift Training Programs Toronto - Are you searching for a job as a forklift driver? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift check, fuel kinds and handling of fuels, and safe operation of a forklift. Practical, hands-on training helps individuals participating in obtaining essential operational skills. Program content consists of existing rules governing the operation of forklifts. Our proven forklift programs are designed to offer training on these kinds of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

How to Handle Loads Safely

While the lift truck is in use, do not lower or raise the forks. Loads must not extend over the backrest. This is because of the risk of the load sliding back towards the operator. Inspect for overhead obstacles and make sure there is adequate clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

The lift truck is less stable if a load is in a raised position. Ensure that no one ever walks under the elevated fork. The operator must not leave the lift truck when the load is raised.

While handling pallets, forks should be high and level enough to go into the pallet and extend all the way below the load. The fork's width should provide equal distribution of weight.

Before unloading or loading the truck, chock the wheels and set the brakes. Floors should be strong enough to support the weight of the load and the forklift combined. Fixed jacks could be installed to be able to support a semi-trailer that is not attached to a tractor. The entrance door height should clear the forklift height by at least 5 cm. Edges of docks, rail cars and ramps must be marked and avoid them.

Do not stay in a forklift for a long time without right ventilation. The inside of the truck should be well lighted and free of obstructions, trash and loose objects. Check for holes in the floor. The installation of material that are non-slip on the floor will help prevent slipping. Clear whatever obstructions from docks and dockplates and ensure surfaces are not oily or wet.

Forklifts should not be used to push or tow other forklifts.

Click to Download the pdf